The calibration process for the TP200 Probe Changer represents the steps that you would take to prepare to use any of the probe changers that PC-DMIS supports. The process discussed here is specific to the TP200 Probe Changer.
Inserts or extensions are not used for any of the port positions.
TP200 Probe Changer rack
This probe changer DOES NOT need to be mounted on the machine table parallel to a machine axis, such as the X or Y axis. For mounting instructions, consult the documentation that came with your probe changer.
To calibrate your probe changer:
Step 1 - Select the TP200 Probe Changer
Step 2 - Define the Mount Point and Wrist Angle
Step 4 - Prepare for Calibration
Step 5 - Take the First Manual Hit
Step 6 - Take the Second Manual Hit