Step 3 - Define the Ports

The final step prior to rack calibration is to define the ports on the rack that you are calibrating.

To define the ports for your HR-MS or HR-X1 Probe Changer, follow these steps:

1. Select the Ports tab in the Probe Changer dialog box (Edit | Preferences | Probe Changer).

2. In the Active probe changer list, select TYPE=HR-MS or TYPE=HR-X1:

Probe Changer dialog box - Ports tab

3. In the Number of ports box, type the number of ports on your probe changer.

4. To save your changes, click Apply.

You are now ready to begin calibration. The next step starts the calibration process.