Step 3 - Define the Ports

The final step prior to rack calibration of the LSPX5 / HR-XS Probe Changer is to define the ports on the rack that you are calibrating.

To define the ports, do the following:

1. Select the Ports tab in the Probe Changer dialog box (Edit | Preferences | Probe Changer):

Probe Changer dialog box - Ports tab

2. In the Active probe changer list, select TYPE=LSPX5.

3. In the Number of ports box, type the number of ports on your probe changer.

4. To save your changes, click Apply.

You are now ready to begin calibration. The next step starts the calibration process.