Before you continue with the calibration, be sure to back up the following items on both computers:
The entry settings
The *.PRB, and the *.Results files
These data files: abcalib.dat, abcalib_CMM2.dat, abcomp.dat, abcomps_CMM2.dat, aboutput.dat, aboutput_CMM2.dat, wristm.dat, wrists_CMM2.dat, armarm.dat, tool.dat, toolc.dat
The PC-DMIS Settings Editor provides the ability to back up entry settings and user data files. See the "Working with Backup Files and User Data" topic in the PC-DMIS Settings Editor documentation for information on backing up important files.
You may have to back up some files manually. See the "Understanding File Locations" topic for information on where the above file types are stored in case you need to do this.
Now that you have backed up the above files, you should delete the original ones (keep the backed-up ones as needed). This ensures that you're starting with a fresh setup and that previous calibration data won't affect the current calibration.
The next step provides information on creating the basic arm-to-arm relationship.