Quick Start Dimension toolbar
The Dimension toolbar lets you perform geometric measurements and geometric tolerance checks. With the exception of the Key-In dimension, this toolbar contains all the dimensions from the normal PC-DMIS Dimension toolbar. See "Dimension Toolbar" in this chapter.
The Quick Start Dimension toolbar only creates legacy dimensions. It does not create the new Feature Control Frame (FCF) dimensions covered in the "Using Geometric Tolerances" chapter.
About Geometric Measurements | About Geometric Tolerance Checks |
You can use geometric measurements in the following circumstances:
In each geometric relationship between two elements, PC-DMIS creates a third element (point, circle, line, or plane). The default output format of the calculated element includes the most meaningful dimensions. Do not confuse Geometric relationships with geometric tolerances.
|
Geometric tolerance checks test the location, orientation, profile, runout, or form error of a feature (checked feature) relative to a datum reference frame (as applicable). The following checks are available:
PC-DMIS inserts a dimension of the resulting geometric tolerance check between two elements into the Edit window. |
Icon |
Description |
Quick Start Procedure |
Creates a legacy Location dimension. |
Select or measure the feature and click Next, specify the plus and minus tolerances and then click Finish to insert the Location dimension. |
|
Creates a legacy Position dimension. |
Select or measure the feature and click Next, specify the plus and minus tolerances and then click Finish to insert the Position dimension. |
|
Creates a legacy Distance dimension. |
Select or measure the first feature and click Next. Select or measure the second feature and click Next. Specify the plus and minus tolerances, type a nominal value, select either 2D or 3D, and then click Finish to insert the Distance dimension. |
|
Creates a legacy Angle dimension. |
Select or measure the first feature and click Next. Select or measure the second feature and click Next. Specify the plus and minus tolerances, type a nominal value, select either 2D or 3D, and then click Finish to insert the Angle dimension. |
|
Creates a legacy Concentricity dimension. |
Select or measure the first circular feature and click Next. Select or measure the second circular feature and click Next. Specify the plus tolerance and click Next. Click Finish to insert the Concentricity dimension. |
|
Creates a legacy Coaxiality dimension. |
Select or measure the first feature (cylinder, cone, or line) and click Next. Select or measure the second feature (cylinder, cone, or line) and click Next. Specify the plus tolerance and click Next. Click Finish to insert the Coaxiality dimension. |
|
Creates a legacy Circularity dimension. |
Select or measure the first circular feature and click Next. Select or measure the second circular feature and click Next. Specify the plus tolerance and click Next. Click Finish to insert the Roundness dimension. |
|
Creates a legacy Cylindricity dimension. |
Select or measure a Cylinder and click Next. Select or measure the second feature and click Next. Specify the plus tolerance and click Next. Click Finish to insert the Cylindricity dimension. |
|
Creates a legacy Straightness dimension. |
Select or measure a Cone, Line, or Cylinder and click Next. Specify a plus tolerance and click Next. Click Finish to insert the Straightness dimension. |
|
Creates a legacy Flatness dimension. |
Select or measure a Plane and click Next. Specify a plus tolerance and click Next. Click Finish to insert the Flatness dimension. |
|
Creates a legacy Perpendicularity dimension. |
Select or measure the first feature and click Next. Select or measure the second feature. Specify a plus tolerance and a projection distance and click Next. Click Finish to insert the Perpendicularity dimension. |
|
Creates a legacy Parallelism dimension. |
Select or measure a non-point feature and click Next. Select or measure the second non-point feature. Specify a plus tolerance and a projection distance and click Next. Click Finish to insert the Parallelism dimension. |
|
Creates a legacy Total Runout dimension. |
Select or measure a Cone, Cylinder, Line, or Plane and click Next. Specify a plus and minus tolerance and click Next. Click Finish to insert the Total Runout dimension. |
|
Creates a legacy Circular Runout dimension. |
Select or measure a Circle, Cone, Cylinder, Line, or Sphere and click Next. Specify a plus and minus tolerance and click Next. Click Finish to insert the Circular Runout dimension. |
|
Creates a legacy Surface Profile dimension. |
Select or measure a feature and click Next. Specify a plus and minus tolerance. Choose whether the profile is Form Only or Form and Location and click Next. Click Finish to insert the Surface Profile dimension. |
|
Creates a legacy Line Profile dimension. |
Select or measure a feature, and click Next. Specify a plus and minus tolerance and click Next. Click Finish to insert the Line Profile dimension. |
|
Creates a legacy Angularity dimension. |
Select or measure any non-point or non-sphere feature and click Next. Select a Cone, Cylinder, Line, or Plane and click Next. Specify a plus tolerance, a distance, and angle and click Next. Click Finish to insert the Angularity dimension. |
|
Creates a legacy Symmetry dimension. |
Select or measure a line or set for the first feature and click Next. Select the second feature and click Next. Select the third (or datum) feature and click Next. Type a plus tolerance and click Next. Click Finish to insert the Symmetry dimension. |
More: