This section of the PC-DMIS Settings Editor allows you to alter many of the values for the parameters used in the Opt. Probe tab of the Parameter Settings dialog box (Edit | Preferences | Parameters). If the default values for these settings are correct for the measurement, it is not necessary to insert an OptionProbe command into the measurement routine. If the default values need to be overridden for a specific measurement scenario, open the Parameter Settings dialog box and specify an alternate value, and then insert an OptionProbe command into the measurement routine.
Information is provided below for each of the USER_ANALOG_PROBING strings.
More:
MoveAccuracy_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)
ProbeAccuracy_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)
ProbeLowerForce_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)
ProbeManualFine_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)
ProbeMaxForce_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)
ProbeMode_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)
ProbeNumberOfData_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)
ProbeReturnSpeed_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)
ProbeTriggerForce_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)
ProbeUpperForce_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)
ScanAcceleration_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)
ScanOffsetForce_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)
ScanPointDensity_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)