To create some auto features without showing a dialog box at all, you can use QuickFeatures. You need load a CAD model into the Graphic Display window. For more information on QuickFeatures, see "Creating QuickFeatures" in the "Creating Auto Features" chapter of the PC-DMIS Core documentation.
To insert Auto Features into your measurement routine with the Auto Feature dialog box, select Insert | Feature | Auto and then select a feature type. This opens the Auto Feature dialog box for that feature type.
Alternately, you can select the feature type from the Auto Features toolbar:
Auto Features toolbar
Once the Auto Feature dialog box opens for the selected feature, if you have a CAD model, can click on the feature in the Graphic Display window. PC-DMIS fills in the dialog box with the necessary information taken directly from the CAD model. If you don't have access to a CAD model, you can probe hits directly on your part. Once you complete the dialog box, click Create in the dialog box (or press DONE on your jog box) to insert the feature into the Edit window.
This documentation set does not discuss the Auto Feature dialog box and its options. Because many of the Auto Feature dialog box options are common to the different configurations of PC-DMIS, this information is in the PC-DMIS Core documentation. For in-depth information on the options in the Auto Feature dialog box, consult the "Creating Auto Features" chapter in the PC-DMIS Core documentation
For all internal or external features, be sure that you select the proper feature type: HOLE or STUD.
More: